Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Supramolecular isomerism in the hydrogen-bonded network of (5<Emphasis Type="Italic">R</Emphasis>,10<Emphasis Type="Italic">R</Emphasis>)-3,8-dihydroxy-5,10-diethoxy-5,10-dihydrochromeno[5,4,3-<Emphasis Type="Italic">cde</Emphasis>]chromene monohydrate

A new compound (5R, 10R)-3,8-dihydroxy-5,10-diethoxy-5,10-dihydrochromeno[5,4,3-cde]chromene monohydrate was obtained from 3,4-dihydroxybenzaldehyde in aerobic basic aqueous ethanol solution in the presence of manganese chloride and triethylamine and crystallized in orthorhombic P2₁2₁2₁ space group (denoted as 1). When 1 was recrystallized from aqueous methanol, it was transformed to another crystal (2) with the same composition but in P2₁/n space group. The drastic difference in the extensive hydrogen bond network makes 1 a 3D and 2 a 2D infinite supramolecular structure, respectively.     

Use of the tubulin bound paclitaxel conformation for structure-based rational drug design

A new computational docking protocol has been developed and used in combination with conformational information inferred from REDOR-NMR experiments on microtubule bound 2-(p-fluorobenzoyl)paclitaxel to delineate a unique tubulin binding structure of paclitaxel. A conformationally constrained macrocyclic taxoid bearing a linker between the C-14 and C-3'N positions has been designed and synthesized to enforce this "REDOR-taxol" conformation. The novel taxoid SB-T-2053 inhibits the growth of MCF-7 and LCC-6 human breast cancer cells (wild-type and drug resistant) on the same order of magnitude as paclitaxel. Moreover, SB-T-2053 induces in vitro tubulin polymerization at least as well as paclitaxel, which directly validates our drug design process. These results open a new avenue for drug design of next generation taxoids and other microtubule-stabilizing agents based on the refined structural information of drug-tubulin complexes, in accordance with typical enzyme-inhibitor medicinal chemistry precepts.     

侧链型丙烯酸酯共聚物相变的正电子湮没谱研究

利用正电子湮没技术对侧链型热致高分子液晶丙烯酸酯共聚物进行了变温相变研究．除实验标识出样品的相变温度点外，根据试样中自由体积随温度的变化关系，对高分子液晶材料内部立链、侧链以及介晶基元的相变行为特点进行了探讨，并就与小分子液晶变化特点的一些不同做了解释．     

Preparation of methyl (1R,2S,5S)- and (1S,2R,5R)-2-amino-5-tert-butyl-cyclopentane-1-carboxylates by parallel kinetic resolution of methyl (RS)-5-tert-butyl-cyclopentene-1-carboxylate

Comparison of the kinetic and parallel kinetic resolutions of methyl (RS)-5-tert-butyl-cyclopentene-1-carboxylate allows for the efficient synthesis of both (1R,2S,5S)- and (1S,2R,5R)-enantiomers of methyl 2-amino-5-tert-butyl-cyclopentane-1-carboxylate.     

Poly[(μ2‐1,3‐di‐4‐pyridylpropane‐κ2N:N′)(μ3‐glutarato‐κ3O:O′:O′′)dizinc(II)]

The title compound, [Zn₂(C₅H₆O₄)₂(C₁₃H₁₄N₂)]_n or [Zn₂(glu)₂(bpp)]_n, is a novel zinc polymer based on mixed flexible glutarate (glu) and 1,3‐di‐4‐pyridylpropane (bpp) ligands. The Zn^II center has a distorted tetra­hedral geometry and the central atom of the bpp ligand is located at a special site with a C₂ axis passing through it. A layer is formed by Zn–glu bonding. Such layers are pillared by bpp ligands, forming a three‐dimensional framework with large channels. The inverted inter­penetration of two three‐dimensional frameworks completes the mol­ecular structure.     

新型除草剂丙酯草醚A环14C均标记合成和鉴定

以U-¹⁴C-对氨基苯甲酸为前体, 通过酯化、缩合、还原和取代四步反应获得了A环¹⁴C均标记的丙酯草醚, 用PHPLC对其进行纯化. 采用HPLC-MS(ESI), MS(EI)和¹H NMR验证了其结构, 通过HPLC(外标法)确定其化学纯度大于98%; HPLC-LSC和TLC-IIA两种方法分析表明, 其放射化学纯度大于98%, 其比活度为1.089±0.011 mCi/mmol. 合成的化学收率和放化收率均为53%.     

Determination of the types of nitrogen in steels containing aluminium or titanium by an extraction method with hydrogen

The extraction method with hydrogen, hitherto used to determine mobile nitrogen in steels over the temperature range 350–450°C, has been employed at higher temperatures to determine nitrogen bound as aluminium nitride, or as titanium nitride or carbonitride. In steels containing only silicon and titanium as deoxidizers, the nitrogen remaining after passage of hydrogen at 600 or 750°C is present as titanium nitride or carbonitride and can be determined by difference. In steels containing only silicon and aluminium as deoxidizers, the nitrogen remaining after passage of hydrogen at 600°C is present as aluminium nitride and can also be determined by difference. This was verified by determining the aluminium nitride indirectly. The nitrogen released from both the aluminium and titanium steels in hydrogen at 600°C probably results from dissociation of submicroscopic particles of manganese silicon nitride.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Novel Gel—like Process for Synthesizing Submicron LiaNi0.8Co0.2O2 Powders Used in Lithium Ion Batteries

A novel gel-like process has been developed for synthesizing LiaNi0.8Co0.2O2 powders,using citric acid as a chelating agent. This process improves the homogeneity of constituent cation and enhances their reactivity in the obtained precursor. The results of electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. Its initial capacity reached 181.6 mAh/g and reversible efficiency at the first cycle is about 88.6%.